Product Details - features, specs, options, etc.
| Deburring Holder | ST-DBR7-1D |
Product 
|
|
|
|
〈Features〉
◎With the smooth extension and retraction mechanism refined through our tapping holders, deburring on both sides, front and back, is achievable.
※ It can handle deburring on both the front and back with just one holder.
◎The extension and retraction mechanism compensates for dimensional deviations.
◎Three types by spring load. (YELLOE: Soft, GREEN: Medium, RED: Hard)
◎ The holder uses a REGO ER11 collet, compatible with a variety of commercial tools.
◎ We also offer original cutting tools capable of deburring both sides, front and back.[W616-SP]
〈Functions〉
Combination Chart
| Matching Collets | |
|---|---|
| ST20-DBR7-1D | ER11 collet E11M spanner W616-SP original cutting tool PLEASE NOTE : Each KATO deburring holder is supplied with ER11 clamping nut. Please order cutting tolls, wrench and collet separately. |
| Accessories |
|---|
| Nut |
| Options |
| ER11 collet E11M spanner W616-SP original cutting tool PLEASE NOTE : Each KATO deburring holder is supplied with ER11 clamping nut. Please order cutting tolls, wrench and collet separately. |
| ST-DBR7-1D |
|
| Model | L0 | L1 | C1 | C2 | F1 | F2 | Shank | Shank diameter d | Spanner | Weight [kg] | DXF | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| d2 | l2 | |||||||||||
| ST20-DBR7-1D Yellow | 100 | 65.5 | 30 | 16 | 10 | 10 | 20 | 40 | φ3～7 | E11M | 0.41 | Download |
| ST20-DBR7-1D Green | 100 | 65.5 | 30 | 16 | 10 | 10 | 20 | 40 | φ3～7 | E11M | 0.41 | Download |
| ST20-DBR7-1D Red | 100 | 65.5 | 30 | 16 | 10 | 10 | 20 | 40 | φ3～7 | E11M | 0.41 | Download |
| Permissible maximum speed | 8000 [r/min] |
|---|---|
| Maximum diameter of the tool shank | φ7 (ER11 collet) |
| Load setting (3 types) | YELLOW(Soft), GREEN(Medium) & RED(Hard) |
| Expansion and Contraction volume | Each 10mm |
| Shank | Straight shank 20mm diameter |
| Cutting fluid | Dry condition |
| Cutting tools example | Carbide rotary bar, whetstone with shaft, etc. |
